How to Flash Stock Rom on Samsung Galaxy J7 Prime SM-G6100: Android is a popular mobile phone operating system widely used around the glove which requires regular update. Regular update enables the user to get the latest features and facilities. If you own an Android device, you may require flashing stock ROM/Firmware under various situations. You may require flashing custom ROM, Custom Recovery or Custom Kernel and facing different issues or full Unroot, Unbrick, or bring back to its original state.
Therefore, it is crucial to know How to Flash Stock Rom on Samsung Galaxy J7 Prime SM-G6100. In this guideline, we have used Odin flash software.
Why Odin Flash Tool?
Odin flash tool is a cross platform application. We used the Odin flash tool for flashing stock Rom and for fixing the hard brick device. This is very user friendly tool that is only used on Samsung devices.
Reasons for flashing Stock Firmware:
There are many reasons for flashing your mobile phones for example- Boot loop issue, massive lags, soft bricks etc. So if you have one of the reasons mentioned earlier, you are in the right place.
Required things before flashing:
- Original USB Cable and Working PC.
- Mobile phone required more than 60% battery health depending on longevity.
- After flashing, all apps and data will be erased, so better you take a backup before flash.
- Enable USB debugging and unlock OEM in your phone. (To do it, go to Settings>Developer options)
Preparation for flashing ROM on Samsung Galaxy J7 Prime SM-G6100:
Step 1: Download the Samsung ‘USB Drivers’ for your Computer. Please do not download this if your PC already got this.
Step 2: Download Samsung Galaxy J7 Prime SM-G6100 Stock Firmware:
Download the firmware that is compatible with your mobile device and extract it on your computer. Please skip this step if it is already downloaded in your computer.
Step 3: Switched your Samsung galaxy device off.
Step 4: Now boot your device into the download mode. (To do this, press and hold ‘Volume down key, home key and power key’, release the ‘power key’ when it vibrates but ‘keep press & hold other two keys’)
Step 5: When you are in Download mode you can see a ‘warning message’. Now press ‘volume up key’ to continue the flashing process.
Step 6: Download the ‘Odin tool’ and extract it on your computer.
Step 7: Connect your phone to the PC through USB cable. When you connect it, Odin will recognize your device automatically and show ‘Added’ message. (If it is not so, your driver is not correctly installed with the PC and try with another USB port to establish successful connection)
Step 8: When your device detects Odin tool, please select the extracted ‘.tar.md5′ firmware file from the check box mentioned below. (If your zip file holds only one extracted file, it is “AP” and otherwise selects other buttons and locates other suitable firmware files also. You can find the correct and proper file using the file name of extracted files.
- BL: BL_file name.tar.md5
- AP: AP_file name.tar.md5
- CP: CP_file name.tar.md5
- CSC: CSC_file name.tar.md5
Start Flashing Stock Rom on Samsung Galaxy J7 Prime SM-G6100
Now click the ‘Start’ button to start the flashing process.
Step 10: When it shows ‘Pass’ with Green color, remove the USB cable from device.
Step 11: (Additional)
- Now press and hold ‘Volume up key, Home button and Power key’ to take your phone to the stock recovery mode. Leave the power key when it beeps but keep press and hold other two keys.
- In the recovery mode select ‘wipe data factory reset’.
Step 12: Select “Reboot system now”
Step 13: In this stage, your device completes the Reboot and Flashing process successfully.