What to Do If Your Galaxy Smartphone Gets Wet

 This guide will describe  troubleshooting  steps if Your Galaxy Smartphone Gets Wet or suffering from water.



What to Do If Your Galaxy Smartphone Gets Wet

Follow the steps below

1-UNCOVER AND REMOVE THE BATTERY

If  Galaxy Smartphone Gets Wet or suffering from water or another liquid, then open its back cover and remove the battery as soon as possible.

2-Power Off if Galaxy Gets Wet or suffering from water

Take out Samsung Galaxy from the liquid and turn it OFF. Open the back cover and remove the battery, SIM card, and microSD card  quickly . Because of the  conductive natures, water and other liquids may cause the short-circuit. Leave the device to dry completely. Do not turn it ON , charge it, or connect it to other devices.



 

3-Wipe It Off

if Your Galaxy Smartphone Gets Wet or suffering from water

Use a soft, absorbent cotton cloth to dry the Android. Now carefully wipe down the headphone jack and charge port. If Galaxy is a GSM/AT&T model, then remove and dry the SIM card and tray as well. Do not use a heat source to evapourate liquid because it can cause an additional damage.

 

4-Dry and Absorb

if Your Galaxy Smartphone Gets Wet or suffering from water

Keep the device in a safe and dry place. Leave it for at least 48 hours to evaporate the liquid before reinserting the SIM or microSD cards or turning on the device.

 

5-Alternative Drying Method: Place Phone in Rice

Keep the device in a plastic bag filled with uncooked rice. Rice will facilitates the evaporation process. Dry rice grains act as a safe, natural alternative of other substances like silica gel. Rice absorbs excess liquid and it is too large to enter ports.

 

6-Review Your Samsung Warranty

It is better to review the terms and conditions of Android’s warranty. Liquid damage voids your manufacturer’s warranty as well as any additional network coverage. However, third-party warranty vendors such as Asurion, Protect Your Bubble, and SquareTrade offer coverage for accidental drops, spills, and submersion. If device’s warranty cover any one of these,  claim to replace the phone.

At Last

If the device submerge in any liquid other than water, coffee, soda, juice, or alcohol, then you have to take additional measures to preserve functionality. When these other liquids evaporate, they leave behind residue which can damage internal components. If warranty does not cover liquid damage and you can not send it for repairing or replacing the device. Then you can try to submerging the device in circuit-safe cleaner or pure grain alcohol. Pure grain alcohol absorbs water, cleans impurities, and evaporates without leaving behind a conductive residue. After taking out the phone from alcohol, leave the device for 48-hour to dry before power it “ON”.

Related posts

Leave a Comment