Lucas Noah Flash Stock Rom on Cherry Mobile Flare J3 Plus – Welcome to Our Flashing Tutorial on MediaTek Devices. In this post, I am going to explain the step-by-step process of Flashing Stock ROM on Cherry Mobile Flare J3 Plus using SP Flash Tool and I give you all the original firmware and Flashing Tool that suits your Cherry Mobile Flare J3 Plus. Furthermore, To help with your common Flashing issues, I’ve brought up the FAQ section. If you are searching FAQ or Complete Flashing Guide then, continue reading this article as it can help you in one way or another. Read more – Stock Rom vs Custom Rom
Why I want to Flash Cherry Mobile Flare J3 Plus Firmware
You have to Flash your Cherry Mobile Flare J3 Plus under various circumstances. If you Flashed custom ROM or Custom recovery or performed root on your device and now you want to Unroot, Unbrick, Rollback, back to Stock Firmware/ Stock ROM. or if you want to Upgrade or Downgrade your Android Device OS then you will need to flash the stock firmware. Furthermore, if you got errors like the Black Screen of Death issue, Boot loop issue, massive lags, soft bricks, overheating, unexpectedly shut down then you have to perform this operation to bring your device back to its original state. Read More – Adding IR sensor for your Cherry Mobile Flare J3 Plus | As TV/AC Remote
Requirements for Flashing :
- Download the Stock Firmware for your device.
- Download the latest SP Flash Tool
- Download the latest USB Drivers.
- Use Original USB cable and working laptop.
- Maintain at least 60% of the battery percentage.
- Enable USB debugging and OEM unlock – Optional
WARNING!
Flashing Stock Firmware on Cherry Mobile Flare J3 Plus can erase all of your data.
All described operations, you are doing at your own risk.
If you want to save data get a backup before start.
Before Flashing, be sure to check your processor type
Before flashing your device, you should check your device’s processor type. You can only follow this guide if your Device is MediaTek. If your device is Qualcomm, follow the Qualcomm Guide. ( You can find it by searching for “Flash Stock Firmware [Name]” on our website) To check processor type, go to GSMArena and check the device specifications under the chipset.
Preparation for Flashing Stock Firmware on Cherry Mobile Flare J3 Plus
Step 1
- Download Cherry Mobile Flare J3 Plus USB Driver and install it on Your Computer. If you already install USB Drivers, then skip this Step.
Download SP Flash Tool For Cherry Mobile Flare J3 Plus
Step 2
- Download SP Flash Tool and Extract it to Your Computer. Read More – Increase RAM SIZE after root on Device?
Download Stock Firmware For Cherry Mobile Flare J3 Plus
Step 3
- Download Stock Firmware for your Cherry Mobile Flare J3 Plus (Just type Model Name and Download ) and Extract it to your computer.
Step 4
- Turn Off your Cherry Mobile Flare J3 Plus
Step 5
- Open SP Flash Tool from Computer. Run it as Administrator (You have Downloaded it in Step #2 )
- And Connect Your Cherry Mobile Flare J3 Plus to Computer using Original USB Cable
- Just press the volume buttons a couple of times so that the computer detects your device.
Step 6
- Click on the Download Tab
- In the Download Tab, you should click on the scatter-loading button.
Installing Stock Firmware on Cherry Mobile Flare J3 Plus
Step 10
- After that Locate the scatter file (you will find the scatter file in the Stock ROM folder).
- Now, we can start Flashing Process. Click the “Download” button to Begin Flashing Process. This process may take 10 Min to fully complete. (Don’t unplug the phone cable and Wait.)
- After Flashing Process complete, the Tool will indicate the Green “Pass” message. now you can disconnect your Device from your computer.
- You will see your Cherry Mobile Flare J3 Plus is getting Restarting. if not, Restart the device manually.
Step 11 Optional
- Factory reset your Cherry Mobile Flare J3 Plus device and make sure all is well. (First Boot Normally Slow)
Frequently Ask Questions :
I can’t Flash Stock Rom on Cherry Mobile Flare J3 Plus
Try Again with the latest SP Flash Tool and fresh Stock firmware (it is better to download files from another server). If your problem persists then, please open Help topic with details under android in our Forum
Cherry Mobile Flare J3 Plus doesn’t turn on, not respond to the power button ( Dead/Soft Brick)
- Let’s be a little more patient. Because the Flashing process takes some time. (20min)
- If there is no progress then, download Firmware and the latest SP Flash Tool from another source and try again.
- If your problem persists then, please open the Help Topic with details under android in our Forum.
Cherry Mobile Flare J3 Plus Doesn’t pass boot logo/ boot-loop
- after flashing, the Cherry Mobile Flare J3 Plus does not pass the logo and keeps restarting until the logo. That means the phone is stuck in the boot loop. so, we have to take action for this. But is this the first time after flashing? Give it time. (20 minutes)
- If your problem persists then, please open the Help Topic with details under android in our Forum.
Cherry Mobile Flare J3 Plus continuously restarts/ keep rebooting
- Follow this Guide-line again with Fresh Firmware and SP Flash Tool from another source.
- We also have some dedicated posts about this. you can search for them.
- If your problem persists then, please open the Help Topic with details under android in our Forum.
Phone automatically disconnecting during flashing
- Use Different USB Port
- After that, run SP Flash Tool as administer.
- Make sure you have the correct driver installed (Download from above link)
- If the problem persists then use another PC
- If your problem persists then, please open the Help Topic with details under android in our Forum.
USB device not recognized
- This is a normal USB error and it is not related to SP Flash Tool. The only thing you can do is change the USB port, try with another cable, try with another Computer.
- if you need to fix this problem first, then go to this troubleshooting guide. However, it is better to bookmark this page for future use.
- If your problem persists then, please open the Help Topic with details under android in our Forum.
progress bar stuck at waiting
After clicking “Downloading”, the progress bar gets stuck Waiting…
- Make Sure the Device is Turn off with enough charged battery.
- Reinstall USB drivers, try with different USB Port
- Tap and Hold the Volume down button while connecting to the PC.
- Read more
Phone automatically disconnecting during flashing
- Try changing the USB-port
- After that run Sp Flash Tool as ADMIN.
- Make sure you have the correct drivers installed (see here)
- Finally, try another PC and USB cable.
- If your problem persists then, please open the Help Topic with details under android in our Forum.
5054 ERROR – BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
- Make sure your firmware is intended for your device. If yes, then try formatting before flashing again to avoid any other issues.
- If your problem persists then, please open the Help Topic with details under android in our Forum.
Initialize scatter file failed. Please check the scatter file name you load is legal
- Make sure the scatter file was not renamed previously. If you’re sure that the scatter file’s name was unaltered, then try using a higher version of Sp Flash Tool.
- Read More
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
- Make sure that the file(s) you’re trying to flash are actually for your exact phone model
- After that ensure you tick the boxes for only the files present in the ROM you’re about to flash
- You probably might have the wrong driver installed. re-install it manually
- If your problem persists then, please open the Help Topic with details under android in our Forum.
4001 ERROR – S_FT_DA_NO_RESPONSE or Da didn’t send response data to FlashTool!
- Try changing the USB-port
- After that Then run Sp Flash Tool as ADMIN.
- After that make sure you have the correct drivers installed
- Read More.
BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
- After that Try using a higher version of Sp Flash Tool.
- After that try changing the USB cable and port or the PC itself.
- If your problem persists then, please open the Help Topic with details under android in our Forum.
Device auto restarting
- It may be your Cherry Mobile Flare J3 Plus’s case is pressing the power button (Clean the power button.)
- or Maybe, your current stock Rom is damaged or Corrupted. So you have to Install Stock Rom/custom Rom to your device. use this post to Flash new Stock Rom.
We have a Dedicated post “list of sp flash tool errors and Solutions” guide. So you can fix all of the below errors from it. Is your error not here? then, please open the Help Topic with details under android in our Forum.
Sp Flash tool remains at 0%BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)Error 8038! Android download pmt is ready and layout has been changedBROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM failThe BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)The BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)The BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)The BROM ERROR:S_COM_PORT_OPEN Fail(1013)BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)The BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)BROM ERROR : S_FT_FORMAT_FAILThe BROM ERROR: S_STORAGE_NOT_MATCH (3182)BROM ERROR: S_TIMEOUT (1042)The BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)The BROM_ERROR_S_STORAGE_NOT_MATCH (3178)SP FLASH TOOL ERROR (8406)BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)The BROM ERROR : S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHEDBROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAILBROM ERROR: SP FLASHTOOL ERROR 6010 CODE DOWNLOAD FORBIDDENThe BROM ERROR: S_FT_GET_MEMORY_FAIL (0xFDA)S_DL_GET_DRAM_SETTING_FAIL (0x13BE)PRO_INFO: Failed to get PMT infoBROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR CODE: 0X00BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)The BROM ERROR: S_CHKSUM_ERROR (0X411)BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)TOOL DL image Fail !BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)The BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)The BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)The BROM ERROR : S_CHIP_TYPE_NOT_MATCH (3179)BROM Exception! ( ERROR : S_DA_SDMMC_READ_FAILED (3153)BROM ERROR : S_DL_READ_PT_FAIL (5073)ERROR: Not Implement. (0×C001000C)ERROR : STATUS_SEC_DL_FORBIDDEN (0xC0020004)ERROR : STATUS_SEC_WRITE_DATA_NOT_ALLOWED (0xC002000C)SWD after sales preload files failedError: status_mmc_err (0xC0040030)Error Getting BROM ERROR: 6047ERROR : S_DL_WRITE_PT_FAIL (5072)BROM ERROR: S_SECURITY_SECURE_USB_DL_IMGAE_SIGNATURE_VERIFY_FAIL (6046)
Cherry Mobile Flare J3 Plus does not work after flashing
- What is the error message that you get? Can you give it then, we can help you. please open the Help Topic with details under android in our Forum.
How to Write IMEI on Cherry Mobile Flare J3 Plus
- Sometimes, after Flashing your phone, you have to Rewrite IMEI. so you may need to Flash IMEI too. use this guide for it.
Screen showing a blank white screen
- If you get a black, white, yellow, blinking, or multicolored screen after flashing firmware, then this FAQ is for you
- This may sound scary, but it is the easiest problem that one can solve without any trouble. The problem reason is some mirror problems in primary memory. Although the whole Device works here,
- please open the Help Topic with details under android in our Forum.
How to revert back to the previous version of Android
- When you flash a new custom ROM found from the internet, you will inevitably get errors if it is still test-level. such as the camera fails, WiFi fails, the NFC Fails, the GPS fails, hotspot fails, Bluetooth Fails…
- But is there a chance to downgrade / Comeback to Android Marshmallow, Oreo, Nougat, Pie, Android 10, Android 11? I’d like to say. Yes. Find a suitable Android version and flash it like the guide above
Connect with us
We would like to hear your problems, questions, and suggestions. so feel free to contact us. this is free of charge service that we offer. but we receive thousands of emails per day. so it is impossible to reply to all of them. so we create a Community to help you individually. go to Community and open help Topic under Android. please spread this post to your friends by sharing Facebook and other major social media. and make sure to like us on Facebook.