Here's a complete step by step guide on how to use the Miracle Box Tool to flash MediaTek powered Android smartphone or tablet firmware.
Before you move on to the Recycle Bin flash firmware using the Miracle Box Tool, follow the preparation steps listed below for a smoother flash process.
If you are using an antivirus application on your computer, please disable or uninstall it before following the instructions below.
It is recommended that you back up your data as flashing firmware will erase all data on your device.
Make sure your phone has enough power. It is recommended to charge the device at least 50-60% to carry out the flashing process.
Don't confuse the scattered format with the .bin format. The .bin format is a single (large) bin file, while the scatter format consists of a scatter file and multiple .bin files (e.g. recovery.bin, secro.bin, etc.).
Don't stop the flashing process as this can lock your device and cause it to shut down.
How to use Miracle Box Tool to Flash bin Firmware
Step 1: Download and install the MediaTek USB VCOM driver on your computer. If you already have drivers installed, skip this step
Step 2: Download and download the Android ROM ROM firmware for your Android phone or tablet on your computer.
Step 3: Download and extract Miracle Box Tool to your computer from here. After extracting you will find the following files
Step 4: Now open Miracle Loader ex on your computer
Step 5: After Miracle Box is launched, click on the MTK tab
Step 6: Now select the Write option.
Step 7: Select the mobile chipset from the drop-down menu
Step 8: Now click on the Browse button and select the .bin firmware file.
Step 9: Now click on the Start button.
Step 10: Turn off your phone (with a charged battery) and connect it to your computer with a USB data cable.
Step 11: As soon as Miracle Box is recognized, the device will start flashing automatically.
Step 12: Wait for the Miracle Box Tool to finish installing the firmware on your Android phone or tablet.
Step 13: After the flash process is complete, close the Miracle Box Tool, disconnect the device from the computer and restart the device.
Congratulations! You have now successfully tested the firmware with the Miracle Box Tool on your MediaTek-based smartphone or tablet.
Connect with us
We would like to hear your problems, questions, and suggestions. so feel free to contact us. this is a free-of-charge service that we offer. but we receive thousands of emails per day. so it is impossible to reply to all of them. so we create a Community to help you individually. go to Community and open help Topic under Android. please spread this post to your friends by sharing Facebook and other major social media. and make sure to like us on Facebook.